TheTerrorist_75

I just close my eyes and start thinking about designing a new home, PC or street rod. After awhile I drift off.

Let me know how the setup runs when you get it completely built. I am considering a similar setup. Time to turn my old giant box into a spare. Darn space is limited.

I would wait for the new graphic card. Integrated graphics suck for high end games anyway.

You may have to check with the computer or motherboard maker to get updated drivers. Is this a Dell or other proprietary PC?

http://www.bleepingcomputer.com/startups/L...erver-7634.html More info on dealing with the LexBce Server. "Spooler subsystem app has encountered a problem and needs to close" and "Operation could not be completed" error messages

This is the newest driver for Windows XP/2000 32-bit. http://www.nvidia.com/object/winxp_2k_81.95.html Your integrated graphics is listed. Click Products supported at the left. You will need Direct X 9c installed previous to installing it. Also read Driver Installation Hints More info NVIDIA GeForce problems

I would stick with the MSI. It has an AGP slot so you could use your AGP video card until you could afford a PCI-E. MSI's support is better and their manual is readable plus you can get any driver's needed at their site if your CD gets lost or scratched.

When my cirrhosis first started my ankles and feet would swell until I elevated my legs. After awhile as I got worse so did the edema. My feet would swell to the point that shoes three sizes larger would not fit. The edema traveled further up my legs. My calf size went from 24" to 30". No matter how long I elevated my legs it wouldn't reduce the swelling. I ended up going to a therapist who taught me how to massage my lymphatic channels to move the fluid up my extremities. Even though it is no longer a problem I still sit in a recliner with my legs up when I am at my computer. Causes of Edema

You can't get just one. They're addictive. My older brother has a crap load. Many were done by a professional and he had no problems, but one of his prison tats caused hepatitis. You definitely need to know the person's health record that tattoos you.

Pete_C posted this at G$. Lots of bad advice for critical WMF vulnerability!

This describes extracting the lexbces.exe file. This file is for using the printer on a network. Some anti-virus programs detect this as malware and some firewalls will block it. Lemark is notoriously bad when trying to uninstall it. Error: " The Print Spooler or one of its dependencies is not available. " Read through some of these regarding lexbce.exe

Error: The print spooler cannot be started, do you want to start it now LexMark Knowledgebase / Spooler LexMark Technical Support Z715

Cheesecake

An LCD using DVI would be much better on the eyes. Get a 17"-19" LCD and set it to 800 x 600. Your eyes will thank you. My CRT starts bugging my eyes after a few hours no matter what I set the contrast to. I have it running at 800 x 600 with the fonts set to Largest. Be sure to read the reviews of LCD monitors. There is a lot of cheap crap out there. I should add you will need a video card with DVI out to work with the LCD monitor. Analog just doesn't cut it.

You either need to jumpaer the drives as Master/Slave or Cable Select. With WD drives it will be Master - Dual drives and Slave or CS.

If you just install Windows on the Master drive then fdisk the Slave drive leaving it "raw" you can install Linux to the slave and it will create the partitions plus install Lilo or Grub which will allow access between the two OSes and a choice of which drive to boot from. Post what you want to accomplish in the Linux help section.

So Storage Partition on the Slave Drive = Fat 32 See, thats what I used to do, I set the master drive to boot first. However, It's a pain cause if I wanted to let teh slave drive boot, I first had to get in bios and set it so slave drive boots first. That's one reason I bought one of these. Just use a switch to select drive. If you can find one it works great. I ahven't seen any listed but you can make one yourself. I'll have to search for the article on building your own. NickLock hard drive switcher

You can set which hard drive boots in the Bios. If you format the slave drive with FAT32 the storage partition can have read/write access for both WinXP and Linux. I think you need to partition the slave drive that has Linux to three partitons. You will need a swap partition (2GB) then a partiton for Linux (root) and finally your shared partition. Check with the Linux crew on how to set it up.

In 2003 Win98 had a 28% (90+ million people) share of Windows OSes used by consumers. Business users comprised the 14% share mentioned. Win98 is still installed on many PCs such as mine. Support doesn't end until mid 2006 and then who is to say the MS will not extend that again. I have downloaded every update and burned it to disk. I shall not install WinXP until I see a stable release of SP3. I expect to see WinXP used for another 5 years at least. Many people will be unwilling to use Vista for a few years after it's release due to the past record of MS. Remember WinME is just a fluffed versi

Scrapple

Because that is a proprietary motherboard you may have a problem putting it in a different case. You might have to alter the case and/or I/O back panel.

Glossary/Dictionary of Computer Cases

is he the guy that said he the god on the avatar? No. That's I_am_lord.

New Years Day is the only time I don't adhere to my diet. I love all of the taboo stuff for breakfast and shall enjoy plates full of Sauerbraten late in the afternoon. The only thing I can no longer enjoy is my Bloody Marys or Whiskey Sours.

You are referring to me after I lost my cool with that moron spammer MiStaBIGshOt. That $%&**$## is going to cause harm to someone's computer if he keeps jumping in with replies that are no solution and even more dangerous than inuyasha320. I have repeatedly asked the mods to talk to him. but it hasn't helped. I do resort to harsh language when highly irritated. It has nothing to do with morals. Obviously some people have never worked in the construction trades or been in a barroom if they have never been exposed to that language.