Is There

bobgo2627 · December 30, 2005

Ok I am wondering since CentOS folks have been no help I am wondering where I should turn next to getting my USB printer going? Maybe I should just spend the $40 on getting a USB print server and let it do the work.

iccaros · December 30, 2005

please post I asked for in the last thread.. then we can move on.

bobgo2627 · December 30, 2005

The last thread is gone.

please post I asked for in the last thread.. then we can move on.

naraku9333 · December 30, 2005

It's been moved here.

bobgo2627 · December 30, 2005

Nope it is gone. Sorry.

It's been moved here.

iccaros · December 30, 2005

what is in you /etc/cups/printers.conf file?

what is the adderss of your printer

have you run ptal-init setup

hen you run

ptal-devid <printer address>

bobgo2627 · December 31, 2005

.conf file I would not know what to look for other than it looks like the default file.

<DefaultPrinter hpdeskjet>
Info Created by redhat-config-printer 0.6.x
DeviceURI usb:/dev/usb/lp0
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>

The printer address? What do you mean? It is on the USB port. What do you mean when I run the other setup? I mean I am in command line.

Edited December 31, 2005 by Honky Buzz

iccaros · December 31, 2005

ptal-init setup

is the setup program for hpoj.. if it's not installed you do not have hpoj installed.. and that is your first place to look.

(it will give you your printer adderess

example mine is

mlc:usb:PSC_2200_Series)

bobgo2627 · December 31, 2005

Well it is not using hpoj as I stated. I am using the other driver that I listed above. I also ran this program or what ever it is and it could not find nothing as it did not use the hpoj driver. I am not giving up hope here. I think we are getting some place. Also, I did put the printer.conf file you so I hope it helped you out.

ptal-init setup
is the setup program for hpoj.. if it's not installed you do not have hpoj installed.. and that is your first place to look.
(it will give you your printer adderess
example mine is
mlc:usb:PSC_2200_Series)

Edited December 31, 2005 by Honky Buzz

iccaros · December 31, 2005

installing a printer for and with CUPS

First, go to LinuxPrinting.Org http://linuxprinting.org/ to find and download the correct PPD file for your printer and CUPS. To do so, click the link Printer Listings to the left. Select your printers manufacturer and the model in the pulldown menu, eg HP and DeskJet 930C. Click "Show". On the page coming up click the "recommended driver" link after reading the various notes and information. Then fetch the PPD file from the next page, again after reading the notes and introductions there. You may have to select your printers manufacturer and model again. Reading the CUPS quickstart guide is also very helpful when working with CUPS.

Now you have a PPD file for your printer to work with CUPS. Place it in /usr/share/cups/model. The PPD for the HP DeskJet 930C was named HP-DeskJet_930C-hpijs.ppd. You should now install the printer. This can be done via the CUPS web interface or via command line. The web interface is found at http://PrintServer:631 once CUPS is running.

Code Listing 4.12: Install the printer via command line

# lpadmin -p HPDeskJet930C -E -v usb:/dev/ultp0 -m HP-DeskJet_930C-hpijs.ppd

Remember to adjust to what you have. Be sure to have the name (-p argument) right (the name you set above during the Samba configuration!) and to put in the correct usb:/dev/usb/blah, parallel:/dev/blah or whatever device you are using for your printer.

You should now be able to access the printer from the web interface and be able to print a test page.

note since you only have command line... get the driver from a diffrent machine

bobgo2627 · December 31, 2005

Well I do not see any PPD for a HP DeskJet 3520 there.

installing a printer for and with CUPS
First, go to LinuxPrinting.Org http://linuxprinting.org/ to find and download the correct PPD file for your printer and CUPS. To do so, click the link Printer Listings to the left. Select your printers manufacturer and the model in the pulldown menu, eg HP and DeskJet 930C. Click "Show". On the page coming up click the "recommended driver" link after reading the various notes and information. Then fetch the PPD file from the next page, again after reading the notes and introductions there. You may have to select your printers manufacturer and model again. Reading the CUPS quickstart guide is also very helpful when working with CUPS.
Now you have a PPD file for your printer to work with CUPS. Place it in /usr/share/cups/model. The PPD for the HP DeskJet 930C was named HP-DeskJet_930C-hpijs.ppd. You should now install the printer. This can be done via the CUPS web interface or via command line. The web interface is found at http://PrintServer:631 once CUPS is running.
Code Listing 4.12: Install the printer via command line
# lpadmin -p HPDeskJet930C -E -v usb:/dev/ultp0 -m HP-DeskJet_930C-hpijs.ppd
Remember to adjust to what you have. Be sure to have the name (-p argument) right (the name you set above during the Samba configuration!) and to put in the correct usb:/dev/usb/blah, parallel:/dev/blah or whatever device you are using for your printer.
You should now be able to access the printer from the web interface and be able to print a test page.
note since you only have command line... get the driver from a diffrent machine

iccaros · December 31, 2005

wow..

holding hand..

a simple google search of HP DeskJet 3520 ppd turned up this link

http://linuxprinting.org/ppd-o-matic.cgi?d...Jet_3520&show=0

letting go of hand

bobgo2627 · December 31, 2005

OK I put the file in the directory as above. Then I did this,

lpadmin -p HPDeskJet3520 -E -v usb:/dev/usb/ltp0 -m HP-DeskJet_3520-hpijs.ppd

so where do I go now?

iccaros · January 1, 2006

try the lp command to see if you can print..

if you don't know the lp command try man lp

or

from another computer with webbrowser use this address

http://ipaddressofcomputerwithprinter:631

when asked to login use root and the root password

bobgo2627 · January 1, 2006

Ok what command will I type? Also I have tried the other PCs to see if I could get to the printer but nothing doing. It does not work. so where do I go from here?

Edited January 1, 2006 by Honky Buzz

iccaros · January 1, 2006

do as root

ps -ef | grep -i cups

bobgo2627 · January 1, 2006

ok after doint that I got this,

[root@29:2a:ff ~]# ps -ef | grep -i cups
root	  2026	 1  0 Dec29 ?		00:00:00 cupsd
root	  2164	 1  0 Dec29 ?		00:00:00 cups-config-daemon
root	  4169  4136  0 20:41 pts/1	00:00:00 grep -i cups
[root@29:2a:ff ~]#

So where do I go now?

bobgo2627 · January 2, 2006

BUMP

iccaros · January 3, 2006

ok not much time, as I have been in adn out of the hospital the last few days (my wife is expeted to actually give birth one of these times..)

from command line do this

echo "This is a test, only a test" >> /tmp/testfile

cat /temp/testfile | lp

you should get some output like this..

huskeyw@huskeyw ~/projects/sdl $ echo "test" >>/tmp/testme

huskeyw@huskeyw ~/projects/sdl $ cat /tmp/testme | lp

request id is UP_Stairs_Office_Linux_Printer-89 (1 file(s))

here is my cups.conf

huskeyw ~ # cat /etc/cups/cupsd.conf
# CUPS configuration file, generated by CUPS configuration tool.
# This tool is part of KDEPrint, the printing framework for KDE
# since version 2.2.2 and is used by the CUPS supporting module
# in KDEPrint. The predecessors to KDEPrint in former KDE releases
# were KUPS and QtCUPS; they are deprecated and no longer maintained.
#
# Author: Michael Goffioul
#
# Web site: http://printing.kde.org/
#
########################################################################
#																	  #
# This is the CUPS configuration file.  If you are familiar with	   #
# Apache or any of the other popular web servers, we've followed the   #
# same format.  Any configuration variable used here has the same	  #
# semantics as the corresponding variable in Apache.  If we need	   #
# different functionality then a different name is used to avoid	   #
# confusion...														 #
#																	  #
########################################################################
#

# Server

# Server name (ServerName)
#
# The hostname of your server, as advertised to the world.
# By default CUPS will use the hostname of the system.
#
# To set the default server used by clients, see the client.conf file.
#
# ex: myhost.domain.com
#
#ServerName myhost.domain.com


# Server administrator (ServerAdmin)
#
# The email address to send all complaints or problems to.
# By default CUPS will use "root@hostname".
#
# ex: [email protected]
#
#ServerAdmin [email protected]


# Classification (Classification)
#
# The classification level of the server.  If set, this
# classification is displayed on all pages, and raw printing is disabled.
# The default is the empty string.
#
# ex: confidential
#
#Classification classified

Classification none

# Allow overrides (ClassifyOverride)
#
# Whether to allow users to override the classification
# on printouts. If enabled, users can limit banner pages to before or
# after the job, and can change the classification of a job, but cannot
# completely eliminate the classification or banners.
#
# The default is off.
#
#ClassifyOverride off


# Default character set (DefaultCharset)
#
# The default character set to use. If not specified,
# defaults to utf-8.  Note that this can also be overridden in
# HTML documents...
#
# ex: utf-8
#
#DefaultCharset utf-8

DefaultCharset UTF-8

# Default language (DefaultLanguage)
#
# The default language if not specified by the browser.
# If not specified, the current locale is used.
#
# ex: en
#
#DefaultLanguage en

DefaultLanguage en

# Printcap file (Printcap)
#
# The name of the printcap file.  Default is no filename.
# Leave blank to disable printcap file generation.
#
# ex: /etc/printcap
#
#Printcap /etc/printcap

Printcap /etc/printcap


PrintcapFormat BSD

# Security

# Remote root user (RemoteRoot)
#
# The name of the user assigned to unauthenticated accesses
# from remote systems.  By default "remroot".
#
# ex: remroot
#
#RemoteRoot remroot

RemoteRoot remroot

# System group (SystemGroup)
#
# The group name for "System" (printer administration)
# access.  The default varies depending on the operating system, but
# will be sys, system, or root (checked for in that order).
#
# ex: sys
#
#SystemGroup sys

SystemGroup lp

# Encryption certificate (ServerCertificate)
#
# The file to read containing the server's certificate.
# Defaults to "/etc/cups/ssl/server.crt".
#
# ex: /etc/cups/ssl/server.crt
#
#ServerCertificate /etc/cups/ssl/server.crt

ServerCertificate /etc/cups/ssl/server.crt

# Encryption key (ServerKey)
#
# The file to read containing the server's key.
# Defaults to "/etc/cups/ssl/server.key".
#
# ex: /etc/cups/ssl/server.key
#
#ServerKey /etc/cups/ssl/server.key

ServerKey /etc/cups/ssl/server.key

# Access permissions
#
# Access permissions for each directory served by the scheduler.
# Locations are relative to DocumentRoot...
#
# AuthType: the authorization to use:
#
#	None   - Perform no authentication
#	Basic  - Perform authentication using the HTTP Basic method.
#	Digest - Perform authentication using the HTTP Digest method.
#
#	(Note: local certificate authentication can be substituted by
#		   the client for Basic or Digest when connecting to the
#		   localhost interface)
#
# AuthClass: the authorization class; currently only Anonymous, User,
# System (valid user belonging to group SystemGroup), and Group
# (valid user belonging to the specified group) are supported.
#
# AuthGroupName: the group name for "Group" authorization.
#
# Order: the order of Allow/Deny processing.
#
# Allow: allows access from the specified hostname, domain, IP address, or
# network.
#
# Deny: denies access from the specified hostname, domain, IP address, or
# network.
#
# Both "Allow" and "Deny" accept the following notations for addresses:
#
#	 All
#	 None
#	 *.domain.com
#	 .domain.com
#	 host.domain.com
#	 nnn.*
#	 nnn.nnn.*
#	 nnn.nnn.nnn.*
#	 nnn.nnn.nnn.nnn
#	 nnn.nnn.nnn.nnn/mm
#	 nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
#
# The host and domain address require that you enable hostname lookups
# with "HostNameLookups On" above.
#
# Encryption: whether or not to use encryption; this depends on having
# the OpenSSL library linked into the CUPS library and scheduler.
#
# Possible values:
#
#	 Always	   - Always use encryption (SSL)
#	 Never		- Never use encryption
#	 Required	 - Use TLS encryption upgrade
#	 IfRequested  - Use encryption if the server requests it
#
# The default value is "IfRequested".
#
#<Location [resource_name]>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#
## Anonymous access (default)
#AuthType None
#
## Require a username and password (Basic authentication)
#AuthType Basic
#AuthClass User
#
## Require a username and password (Digest/MD5 authentication)
#AuthType Digest
#AuthClass User
#
## Restrict access to local domain
#Order Deny,Allow
#Deny From All
#Allow From .mydomain.com
#
## Use encryption if requested
#Encryption IfRequested
#</Location>

<Location />
Encryption IfRequested
Satisfy All
Order deny,allow
Deny From All
Allow From 127.0.0.1
</Location>
<Location /admin>
AuthType Basic
AuthClass System
Encryption IfRequested
Satisfy All
Order deny,allow
Deny From All
Allow From 127.0.0.1
</Location>

# Network

# Hostname lookups (HostNameLookups)
#
# Whether or not to do lookups on IP addresses to get a
# fully-qualified hostname.  This defaults to Off for performance reasons...
#
# ex: On
#
#HostNameLookups On

HostnameLookups Off

# Keep alive (KeepAlive)
#
# Whether or not to support the Keep-Alive connection
# option.  Default is on.
#
# ex: On
#
#KeepAlive On

KeepAlive On

# Keep-alive timeout (KeepAliveTimeout)
#
# The timeout (in seconds) before Keep-Alive connections are
# automatically closed.  Default is 60 seconds.
#
# ex: 60
#
#KeepAliveTimeout 60

KeepAliveTimeout 60

# Max clients (MaxClients)
#
# Controls the maximum number of simultaneous clients that
# will be handled.  Defaults to 100.
#
# ex: 100
#
#MaxClients 100

MaxClients 100

# Max request size (MaxRequestSize)
#
# Controls the maximum size of HTTP requests and print files.
# Set to 0 to disable this feature (defaults to 0).
#
# ex: 0
#
#MaxRequestSize 0

MaxRequestSize 0m

# Client timeout (Timeout)
#
# The timeout (in seconds) before requests time out.  Default is 300 seconds.
#
# ex: 300
#
#Timeout 300

Timeout 300

# Listen to (Port/Listen)
#
# Ports/addresses that are listened to.  The default port 631 is reserved
# for the Internet Printing Protocol (IPP) and is what is used here.
#
# You can have multiple Port/Listen lines to listen to more than one
# port or address, or to restrict access.
#
# Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
# for encryption.  If you want to support web-based encryption you will
# probably need to listen on port 443 (the "HTTPS" port...).
#
# ex: 631, myhost:80, 1.2.3.4:631
#
#	Port 80
#	Port 631
#	Listen hostname
#	Listen hostname:80
#	Listen hostname:631
#	Listen 1.2.3.4
#	Listen 1.2.3.4:631
#
#Port 631

Listen *:631

# Log

# Access log (AccessLog)
#
# The access log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/access_log".
#
# You can also use the special name syslog to send the output to the
# syslog file or daemon.
#
# ex: /var/log/cups/access_log
#
#AccessLog /var/log/cups/access_log

AccessLog /var/log/cups/access_log

# Error log (ErrorLog)
#
# The error log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/error_log".
#
# You can also use the special name syslog to send the output to the
# syslog file or daemon.
#
# ex: /var/log/cups/error_log
#
#ErrorLog /var/log/cups/error_log

ErrorLog /var/log/cups/error_log

# Page log (PageLog)
#
# The page log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/page_log".
#
# You can also use the special name syslog to send the output to the
# syslog file or daemon.
#
# ex: /var/log/cups/page_log
#
#PageLog /var/log/cups/page_log

PageLog /var/log/cups/page_log

# Max log size (MaxLogSize)
#
# Controls the maximum size of each log file before they are
# rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.
#
# ex: 1048576
#
#MaxLogSize 0

MaxLogSize 1m

# Log level (LogLevel)
#
# Controls the number of messages logged to the ErrorLog
# file and can be one of the following:
#
#	 debug2:	 Log everything.
#	 debug:	 Log almost everything.
#	 info:	  Log all requests and state changes.
#	 warn:	  Log errors and warnings.
#	 error:	 Log only errors.
#	 none:	  Log nothing.
#
# ex: info
#
#LogLevel info

LogLevel info

# Jobs

# Preserve job history (PreserveJobHistory)
#
# Whether or not to preserve the job history after a
# job is completed, canceled, or stopped.  Default is Yes.
#
# ex: Yes
#
#PreserveJobHistory Yes

PreserveJobHistory On

# Preserve job files (PreserveJobFiles)
#
# Whether or not to preserve the job files after a
# job is completed, canceled, or stopped.  Default is No.
#
# ex: No
#
#PreserveJobFiles No

PreserveJobFiles Off

# Auto purge jobs (AutoPurgeJobs)
#
# Automatically purge jobs when not needed for quotas.
# Default is No.
#
#AutoPurgeJobs No

AutoPurgeJobs No

# Max jobs (MaxJobs)
#
# Maximum number of jobs to keep in memory (active and completed).
# Default is 0 (no limit).
#
#MaxJobs 0

MaxJobs 0

# Max jobs per printer (MaxJobsPerPrinter)
#
# The MaxJobsPerPrinter directive controls the maximum number of active
# jobs that are allowed for each printer or class. Once a printer or class
# reaches the limit, new jobs will be rejected until one of the active jobs
# is completed, stopped, aborted, or canceled.
#
# Setting the maximum to 0 disables this functionality.
# Default is 0 (no limit).
#
#
#MaxJobsPerPrinter 0

MaxJobsPerPrinter 0

# Max jobs per user (MaxJobsPerUser)
#
# The MaxJobsPerUser directive controls the maximum number of active
# jobs that are allowed for each user. Once a user reaches the limit, new
# jobs will be rejected until one of the active jobs is completed, stopped,
# aborted, or canceled.
#
# Setting the maximum to 0 disables this functionality.
# Default is 0 (no limit).
#
#
#MaxJobsPerUser 0

MaxJobsPerUser 0

# Filter

# User (User)
#
# The user the server runs under.  Normally this
# must be lp, however you can configure things for another user
# as needed.
#
# Note: the server must be run initially as root to support the
# default IPP port of 631.  It changes users whenever an external
# program is run...
#
# ex: lp
#
#User lp

User lp

# Group (Group)
#
# The group the server runs under.  Normally this
# must be sys, however you can configure things for another
# group as needed.
#
# ex: sys
#
#Group sys

Group lp

# RIP cache (RIPCache)
#
# The amount of memory that each RIP should use to cache
# bitmaps.  The value can be any real number followed by "k" for
# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
# (1 tile = 256x256 pixels).  Defaults to "8m" (8 megabytes).
#
# ex: 8m
#
#RIPCache 8m

RIPCache 8m

# Filter limit (FilterLimit)
#
# Sets the maximum cost of all job filters that can be run
# at the same time.  A limit of 0 means no limit.  A typical job may need
# a filter limit of at least 200; limits less than the minimum required
# by a job force a single job to be printed at any time.
#
# The default limit is 0 (unlimited).
#
# ex: 200
#
#FilterLimit 0

FilterLimit 0

# Directories

# Data directory (DataDir)
#
# The root directory for the CUPS data files.
# By default /usr/share/cups.
#
# ex: /usr/share/cups
#
#DataDir /usr/share/cups

DataDir /usr/share/cups

# Document directory (DocumentRoot)
#
# The root directory for HTTP documents that are served.
# By default the compiled-in directory.
#
# ex: /usr/share/cups/doc
#
#DocumentRoot /usr/share/cups/doc

DocumentRoot /usr/share/cups/docs

# Font path (FontPath)
#
# The path to locate all font files (currently only for pstoraster).
# By default /usr/share/cups/fonts.
#
# ex: /usr/share/cups/fonts
#
#FontPath /usr/share/cups/fonts


# Request directory (RequestRoot)
#
# The directory where request files are stored.
# By default /var/spool/cups.
#
# ex: /var/spool/cups
#
#RequestRoot /var/spool/cups

RequestRoot /var/spool/cups

# Server binaries (ServerBin)
#
# The root directory for the scheduler executables.
# By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).
#
# ex: /usr/lib/cups
#
#ServerBin /usr/lib/cups

ServerBin /usr/lib/cups

# Server files (ServerRoot)
#
# The root directory for the scheduler.
# By default /etc/cups.
#
# ex: /etc/cups
#
#ServerRoot /etc/cups

ServerRoot /etc/cups

# Temporary files (TempDir)
#
# The directory to put temporary files in. This directory must be
# writable by the user defined above!  Defaults to "/var/spool/cups/tmp" or
# the value of the TMPDIR environment variable.
#
# ex: /var/spool/cups/tmp
#
#TempDir /var/spool/cups/tmp

TempDir /var/spool/cups/tmp

# Browsing

# Use browsing (Browsing)
#
# Whether or not to listen to printer
# information from other CUPS servers.
#
#
# Enabled by default.
#
#
# Note: to enable the sending of browsing
# information from this CUPS server to the LAN,
# specify a valid BrowseAddress.
#
#
# ex: On
#
#Browsing On

Browsing On

# Browse protocols (BrowseProtocols)
#
# Which protocols to use for browsing.  Can be
# any of the following separated by whitespace and/or commas:
#
#	 all  - Use all supported protocols.
#	 cups - Use the CUPS browse protocol.
#	 slp  - Use the SLPv2 protocol.
#
# The default is cups.
#
# Note: If you choose to use SLPv2, it is strongly recommended that
#	   you have at least one SLP Directory Agent (DA) on your
#	   network.  Otherwise, browse updates can take several seconds,
#	   during which the scheduler will not response to client
#	   requests.
#
#BrowseProtocols cups

BrowseProtocols CUPS

# Browse port (BrowsePort)
#
# The port used for UDP broadcasts.  By default this is
# the IPP port; if you change this you need to do it on all servers.
# Only one BrowsePort is recognized.
#
# ex: 631
#
#BrowsePort 631

BrowsePort 631

# Browse interval (BrowseInterval)
#
# The time between browsing updates in seconds.  Default
# is 30 seconds.
#
# Note that browsing information is sent whenever a printer's state changes
# as well, so this represents the maximum time between updates.
#
# Set this to 0 to disable outgoing broadcasts so your local printers are
# not advertised but you can still see printers on other hosts.
#
# ex: 30
#
#BrowseInterval 30

BrowseInterval 30

# Browse timeout (BrowseTimeout)
#
# The timeout (in seconds) for network printers - if we don't
# get an update within this time the printer will be removed
# from the printer list.  This number definitely should not be
# less the BrowseInterval value for obvious reasons.  Defaults
# to 300 seconds.
#
# ex: 300
#
#BrowseTimeout 300

BrowseTimeout 300

# Browse addresses (BrowseAddress)
#
# Specifies a broadcast address to be used.  By
# default browsing information is broadcast to all active interfaces.
#
# Note: HP-UX 10.20 and earlier do not properly handle broadcast unless
# you have a Class A, B, C, or D netmask (i.e. no CIDR support).
#
# ex: x.y.z.255, x.y.255.255
#
#BrowseAddress x.y.z.255
#BrowseAddress x.y.255.255
#BrowseAddress x.255.255.255


# Browse order (BrowseOrder)
#
# Specifies the order of BrowseAllow/BrowseDeny comparisons.
#
# ex: allow,deny
#
#BrowseOrder allow,deny
#BrowseOrder deny,allow

BrowseOrder allow,deny

# Implicit classes (ImplicitClasses)
#
# Whether or not to use implicit classes.
#
# Printer classes can be specified explicitly in the classes.conf
# file, implicitly based upon the printers available on the LAN, or
# both.
#
# When ImplicitClasses is On, printers on the LAN with the same name
# (e.g. Acme-LaserPrint-1000) will be put into a class with the same
# name. This allows you to setup multiple redundant queues on a LAN
# without a lot of administrative difficulties.  If a user sends a
# job to Acme-LaserPrint-1000, the job will go to the first available
# queue.
#
# Enabled by default.
#
#ImplicitClasses Off

ImplicitClasses On

# Use "any" classes (ImplicitAnyClasses)
#
# Whether or not to create AnyPrinter implicit
# classes.
#
# When ImplicitAnyClasses is On and a local queue of the same name
# exists, e.g. "printer", "printer@server1", "printer@server1", then
# an implicit class called "Anyprinter" is created instead.
#
# When ImplicitAnyClasses is Off, implicit classes are not created
# when there is a local queue of the same name.
#
# Disabled by default.
#
#ImplicitAnyCLasses Off

ImplicitAnyClasses Off

# Hide implicit members (HideImplicitMembers)
#
# Whether or not to show the members of an
# implicit class.
#
# When HideImplicitMembers is On, any remote printers that are
# part of an implicit class are hidden from the user, who will
# then only see a single queue even though many queues will be
# supporting the implicit class.
#
# Enabled by default.
#
#HideImplicitMembers On

HideImplicitMembers Yes

# Use short names (BrowseShortNames)
#
# Whether or not to use "short" names for remote printers
# when possible (e.g. "printer" instead of "printer@host").  Enabled by
# default.
#
# ex: Yes
#
#BrowseShortNames Yes

BrowseShortNames Yes

# Unknown
huskeyw ~ #

my printer.conf

# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Mon Jan  2 17:08:16 2006
<DefaultPrinter UP_Stairs_Office_Linux_Printer>
Info HP PSC 1300
Location
DeviceURI usb://hp/psc%201310%20series%20?serial=CN496B821QO2
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>

also I do not have CENTOS (or do printing from Red Hat, I use Slackware or Gentoo for file and printing)

but I found this in the release readme

- The printconf system provides a printconf-tui program, for
text-mode printer configuration.
- The printconf-tui program provides command line import and export
capabilities. The import can merge printer definitions with those
that are already present, or it can override them (the default).
Example:
printconf-tui --Xexport > settings.xml
printconf-tui --Ximport < settings.xml
or:
printconf-tui --Ximport --merge < settings.xml
Combined with redirection -- such as bash's 'here documents' (see the
bash man page for more information) -- you can easily put printer setups
into kickstart files.
- The printconf-tui program can clear settings completely.
Example:
printconf-tui --Xclear
- The printconf tools provide limited printer auto-detection.
- redhat-config-printer-tui and redhat-config-printer-gui alias
printconf-tui and printconf-gui, respectively.
- Ghostscript 6.51 is available with this release, and supports many
additional drivers, as well as encrypted PDF files.
- Support is provided for Hewlett Packard hpijs ghostscript print drivers.
Although they are not shipped with CentOS-2,
you can download these drivers from the project site at:
http://hpinkjet.sourceforge.net
The ghostscript print drivers should work as drop-in components.

the last thing I woudl try is this

google for a x-live cd (it run on windows and gives you a Xwindows system and a bash shell)

do a ssh -Y -l <username> ipaddress

say yes to rsa key

enter password

type redhat-config-printer (may need to become root)

this should launch the gui tool on your other computer..

CentOS seams to be a "esay" version of Linux meaning they love to use Gui only tool .. aka like windows.. Its one reason I don't use Red Hat a lot.

bobgo2627 · January 3, 2006

so what do you want me to put in there? I am confused on what you want me to do>

hitest · January 4, 2006

ok not much time, as I have been in adn out of the hospital the last few days (my wife is expeted to actually give birth one of these times..)

Whoa, hang in there man! My wife and I had our second and last baby almost three years ago! Take it easy!

bobgo2627 · January 4, 2006

congrats on the new little one. Now if I could get some help from the rest of the folks here.

bobgo2627 · January 5, 2006

OK I think I am going to give up here. I mean it just seems that I am waisting your kind folks time. I don't think this printer is ever going to run on this linux box. I will just have to shell out the cash for a USB print server.

bobgo2627 · January 8, 2006

BTW here is my cupsd.conf

 #

# "$Id: cupsd.conf.in,v 1.16 2004/08/18 17:53:47 mike Exp $"

#

#   Sample configuration file for the Common UNIX Printing System (CUPS)

#   scheduler.

#

#   Copyright 1997-2004 by Easy Software Products, all rights reserved.

#

#   These coded instructions, statements, and computer programs are the

#   property of Easy Software Products and are protected by Federal

#   copyright law.  Distribution and use rights are outlined in the file

#   "LICENSE.txt" which should have been included with this file.  If this

#   file is missing or damaged please contact Easy Software Products

#   at:

#

#	   Attn: CUPS Licensing Information

#	   Easy Software Products

#	   44141 Airport View Drive, Suite 204

#	   Hollywood, Maryland 20636 USA

#

#	   Voice: (301) 373-9600

#	   EMail: [email protected]

#		 WWW: http://www.cups.org

#



########################################################################

#																	  #

# This is the CUPS configuration file.  If you are familiar with	   #

# Apache or any of the other popular web servers, we've followed the   #

# same format.  Any configuration variable used here has the same	  #

# semantics as the corresponding variable in Apache.  If we need	   #

# different functionality then a different name is used to avoid	   #

# confusion...														 #

#																	  #

########################################################################





########

######## Server Identity

########



#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#



#ServerName myhost.domain.com



#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#



#ServerAdmin [email protected]





########

######## Server Options

########



#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot.  By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#



#AccessLog /var/log/cups/access_log



#

# Classification: the classification level of the server.  If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#



#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified



#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#



#ClassifyOverride off



#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#



#DataDir /usr/share/cups



#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8".  Note that this can also be overridden in

# HTML documents...

#



#DefaultCharset utf-8



#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#



#DefaultLanguage en



#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/doc/cups-1.1.22".

#



#DocumentRoot /usr/share/doc/cups-1.1.22



#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot.  By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#



#ErrorLog /var/log/cups/error_log



# LogFilePerm: determines the file mode to set log files to.

#



LogFilePerm 0600



#

# FileDevice: determines whether the scheduler will allow new printers

# to be added using device URIs of the form "file:/foo/bar". The default

# is not to allow file devices due to the potential security vulnerability

# and due to the fact that file devices do not support raw printing.

#



#FileDevice No





#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#



#FontPath /usr/share/cups/fonts



#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

#	 debug2	Log everything.

#	 debug	Log almost everything.

#	 info	  Log all requests and state changes.

#	 warn	  Log errors and warnings.

#	 error	 Log only errors.

#	 none	  Log nothing.

#

MaxLogSize 2000000000



LogLevel info



#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.

#



#MaxLogSize 0



#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot.  By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#



#PageLog /var/log/cups/page_log



#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped.  Default is Yes.

#



#PreserveJobHistory Yes



#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped.  Default is No.

#



#PreserveJobFiles No



#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#



#AutoPurgeJobs No



#

# MaxCopies: maximum number of copies that a user can request. Default is

# 100.

#



#MaxCopies 100



#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#



#MaxJobs 500



#

# MaxJobsPerPrinter: maximum number of active jobs per printer. The default

# is 0 for no limit.

#



#MaxJobsPerPrinter 0



#

# MaxJobsPerUser: maximum number of active jobs per user. The default

# is 0 for no limit.

#



#MaxJobsPerUser 0



#

# MaxPrinterHistory: controls the maximum number of history collections

# in the printer-state-history attribute.  Set to 0 to disable history

# data.

#



#MaxPrinterHistory 10



#

# Printcap: the name of the printcap file.  Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#



Printcap /etc/printcap



#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris.  The default is "BSD".

#



#PrintcapFormat BSD

#PrintcapFormat Solaris



#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX.  The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#



#PrintcapGUI /usr/bin/glpoptions



#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#



#RequestRoot /var/spool/cups



#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems.  By default "remroot".

#



#RemoteRoot remroot



#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#



#ServerBin /usr/lib/cups



#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#



#ServerRoot /etc/cups





#

# ServerTokens: specifies what information in provided in the Server

# header of HTTP responses. The default is Minor.

#

# ServerTokens None

# ServerTokens ProductOnly	   CUPS

# ServerTokens Major			 CUPS/1

# ServerTokens Minor			 CUPS/1.1

# ServerTokens Minimal		   CUPS/1.1.22rc1

# ServerTokens OS				CUPS/1.1.22rc1 (uname)

# ServerTokens Full			  CUPS/1.1.22rc1 (uname) IPP/1.1

#



#ServerTokens Minor





########

######## Fax Support

########



#

# FaxRetryLimit: the number of times a fax job is retried.

# The default is 5 times.

#



#FaxRetryLimit 5



#

# FaxRetryInterval: the number of seconds between fax job retries.

# The default is 300 seconds/5 minutes.

#



#FaxRetryInterval 300





########

######## Encryption Support

########



#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#



#ServerCertificate /etc/cups/ssl/server.crt



#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#



#ServerKey /etc/cups/ssl/server.key





########

######## Filter Options

########



#

# User/Group: the user and group the server runs under.  Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631.  It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#



#User lp

#Group sys



#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps.  The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.)  Defaults to "8m" (8 megabytes).

#



#RIPCache 8m



#

# TempDir: the directory to put temporary files in.  This directory must be

# writable by the user defined above!  Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#



#TempDir /var/spool/cups/tmp



#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time.  A limit of 0 means no limit.  A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#



#FilterLimit 0



########

######## Network Options

########



#

# Ports/addresses that we listen to.  The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

#	Port 80

#	Port 631

#	Listen hostname

#	Listen hostname:80

#	Listen hostname:631

#	Listen 1.2.3.4

#	Listen 1.2.3.4:631

# 

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption.  If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

# NOTE 2: In order for the command-line and web interfaces to work, you

# must have at least one Port or Listen line that allows access from the

# local loopback address (localhost).

#



#Port 80

#Port 443

Port 631



#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname.  This defaults to Off for performance reasons...

#



#HostNameLookups On



#

# KeepAlive: whether or not to support the Keep-Alive connection

# option.  Default is on.

#



#KeepAlive On



#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed.  Default is 60 seconds.

#



#KeepAliveTimeout 60



#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled.  Defaults to 100.

#



#MaxClients 100



#

# MaxClientsPerHost: controls the maximum number of simultaneous clients that

# will be handled from a specific host.  Defaults to 10 or 1/10th of the

# MaxClients setting, whichever is larger.  A value of 0 specifies the

# automatic (10 or 1/10th) setting.

#



#MaxClientsPerHost 0



#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#



#MaxRequestSize 0



#

# Timeout: the timeout before requests time out.  Default is 300 seconds.

#



#Timeout 300





########

######## Browsing Options

########



#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network.  Enabled by default.

#



#Browsing On



#

# BrowseProtocols: which protocols to use for browsing.  Can be

# any of the following separated by whitespace and/or commas:

#

#	 all  - Use all supported protocols.

#	 cups - Use the CUPS browse protocol.

#	 slp  - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

#	   you have at least one SLP Directory Agent (DA) on your

#	   network.  Otherwise, browse updates can take several seconds,

#	   during which the scheduler will not respond to client

#	   requests.

#



#BrowseProtocols cups



#

# BrowseAddress: specifies a broadcast address to be used.  By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

# The @LOCAL address broadcasts to all non point-to-point interfaces.

# For example, if you have a LAN and a dial-up link, @LOCAL would

# send printer updates to the LAN but not to the dial-up link.

# Similarly, the @IF(name) address sends to the named network

# interface, e.g. @IF(eth0) under Linux.  Interfaces are refreshed

# automatically (no more than once every 60 seconds), so they can

# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.

#



#BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#BrowseAddress @LOCAL

#BrowseAddress @IF(name)



#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".)  Enabled by

# default.

#



#BrowseShortNames Yes



#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

#	 All

#	 None

#	 *.domain.com

#	 .domain.com

#	 host.domain.com

#	 nnn.*

#	 nnn.nnn.*

#	 nnn.nnn.nnn.*

#	 nnn.nnn.nnn.nnn

#	 nnn.nnn.nnn.nnn/mm

#	 nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

#	 @LOCAL

#	 @IF(name)

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#



#BrowseAllow address

#BrowseDeny address



#

# BrowseInterval: the time between browsing updates in seconds.  Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#



#BrowseInterval 30



#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#



#BrowseOrder allow,deny

#BrowseOrder deny,allow



#

# BrowsePoll: poll the named server(s) for printers

#



#BrowsePoll address:port



#

# BrowsePort: the port used for UDP broadcasts.  By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#



#BrowsePort 631



#

# BrowseRelay: relay browser packets from one address/network to another.

#



#BrowseRelay source-address destination-address

#BrowseRelay @IF(src) @IF(dst)



#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list.  This number definitely should not be

# less the BrowseInterval value for obvious reasons.  Defaults

# to 300 seconds.

#



#BrowseTimeout 300



#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties.  If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#



#ImplicitClasses On



#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#



#ImplicitAnyCLasses Off



#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#



#HideImplicitMembers On





########

######## Security Options

########



#

# SystemGroup: the group name for "System" (printer administration)

# access.  The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#



#SystemGroup sys



#

# RootCertDuration: How frequently the root certificate is regenerated.

# Defaults to 300 seconds.

#



#RootCertDuration 300



#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

#	None   - Perform no authentication

#	Basic  - Perform authentication using the HTTP Basic method.

#	Digest - Perform authentication using the HTTP Digest method.

#

#	(Note: local certificate authentication can be substituted by

#		   the client for Basic or Digest when connecting to the

#		   localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address,

# network, or interface.

#

# Deny: denies access from the specified hostname, domain, IP address,

# network, or interface.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

#	 All

#	 None

#	 *.domain.com

#	 .domain.com

#	 host.domain.com

#	 nnn.*

#	 nnn.nnn.*

#	 nnn.nnn.nnn.*

#	 nnn.nnn.nnn.nnn

#	 nnn.nnn.nnn.nnn/mm

#	 nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

#	 @LOCAL

#	 @IF(name)

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# The @LOCAL address allows or denies from all non point-to-point

# interfaces.  For example, if you have a LAN and a dial-up link,

# @LOCAL could allow connections from the LAN but not from the dial-up

# link.  Similarly, the @IF(name) address allows or denies from the

# named network interface, e.g. @IF(eth0) under Linux.  Interfaces are

# refreshed automatically (no more than once every 60 seconds), so

# they can be used on dynamically-configured interfaces, e.g. PPP,

# 802.11, etc.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

#	 Always	   - Always use encryption (SSL)

#	 Never		- Never use encryption

#	 Required	 - Use TLS encryption upgrade

#	 IfRequested  - Use encryption if the server requests it

#

# The default value is "IfRequested".

#



<Location />

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

</Location>



#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>



#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>



#<Location /jobs>

#

# You may wish to limit access to job operations, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>



#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>



#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#



## Anonymous access (default)

#AuthType None



## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User



## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User



## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>



<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks.  You can change

# the group name using the SystemGroup directive.

#



AuthType Basic

AuthClass System



## Restrict access to local domain

Order Deny,Allow

Deny From All

Allow From 127.0.0.1



#Encryption Required

</Location>



#

# End of "$Id: cupsd.conf.in,v 1.16 2004/08/18 17:53:47 mike Exp $".

#

iccaros · January 8, 2006

see this part

# Restrict access to local domain

Order Deny,Allow

Deny From All

Allow From 127.0.0.1



#Encryption Required

</Location>

add something like this (you need to knwo what your network address is)

Allow From 192.168.1.0/24

then do a

services cups stop

services cups start

then see if you can brows to http://ipaddress:631 from another computer..

Is There

Recommended Posts

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Link to post

Share on other sites

Join the conversation