martymas Posted October 4, 2004 Report Share Posted October 4, 2004 any ideas marty recently i made up a p2 and it was going fine until the modem crapped out .i had a couple given to me one a lucent so i installed it and the sys recognises it through plug and play .and the sys installed the driver .im derned if i can get it to dial up.my Qdo i need to go to the lucent website and get a driver. i think lucent has changed its name .or is the driver installed by windows ok at first it said no dial tone .but now it says the user name and password is not recognised by the sys the user name i used is the same as i use on my p4 .so am i not able to use the same password and user name on 2 different machines.any ideasmarty Quote Link to post Share on other sites
maxdog4 Posted October 4, 2004 Report Share Posted October 4, 2004 Do you mean user name and password not recognized by your iSP? The SYS don't know from names and passwords for the modem.... You can use the same name and password on any number of machines. Make sure the cap lock isn't set, and post back... (try a different keyboard) Quote Link to post Share on other sites
TheTerrorist_75 Posted October 4, 2004 Report Share Posted October 4, 2004 You're not trying to connect both to the Internet at the same time are you. You can only use one PC at a time unless they are networked. If one PC is connected and you try to go online with the other then that PC will not be recognized if they are not networked. Quote Link to post Share on other sites
martymas Posted October 6, 2004 Author Report Share Posted October 6, 2004 hi team thanks for posting, but i found the answer from a neighborwho was surfing.and some how got into to driver signing.and in the box which saidblock.never install unsigned software.i tried 2-3 modems and got the message the software wouldnt be installed.so we un checked it.and you guessed it. all of those modems will work now.so obviously lucent isnt signed software, compatable with microsoft.so if any one has the same problems.just check that.signed tab and make sure. dont know why it was in the blocked area.i have a feeling it was the result of installin sp2 thanks team marty Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.