dunce01 Posted September 8, 2005 Report Share Posted September 8, 2005 2.5" USB 2.0 Hard Drive Enclosure (Adaptec) was installed with new hard drive. The hard drive was partioned, and formatted. The unit and it's drivers is recognized in device manager, and listed as working properly. However it's not recognized in My Computer, or Windows explorer. Windows 98seAny asssistance will be highly appreciated.Thanks Quote Link to post Share on other sites
HPoirot36 Posted September 8, 2005 Report Share Posted September 8, 2005 Not sure if I remember how it works in 98se but in XP,right click on My computer,then click on Manage. Then click on disk management. If the drive is there,right click on it,and click on mark partition as active or change drive letter and paths.Honestly its been so long and I've only done it once but thats where I fixed it. Quote Link to post Share on other sites
xxkbxx Posted September 8, 2005 Report Share Posted September 8, 2005 My enclousre was plug and play for XP but it came with a mini disk with 98 driversCheck alldrivers.comuser - allpassword - drivers Quote Link to post Share on other sites
robroy Posted September 9, 2005 Report Share Posted September 9, 2005 you have usb activated in your bios?is the usb port onboard or add on card? Quote Link to post Share on other sites
JDoors Posted September 9, 2005 Report Share Posted September 9, 2005 Do you have any other working USB devices? If not I'd get hold of one to see if USB is properly enabled at all. There may be other drivers required by '9x to see the drive throughout the OS. Quote Link to post Share on other sites
dunce01 Posted September 10, 2005 Author Report Share Posted September 10, 2005 JDoors said: Do you have any other working USB devices? If not I'd get hold of one to see if USB is properly enabled at all. There may be other drivers required by '9x to see the drive throughout the OS.<{POST_SNAPBACK}>Thanks for the response.Yes, and all other USB devices works properly. Guess what ? I connected the enclosure to another machine with XP, and XP recognized it everywhere, and the enclosure worked perfectly.Thanks again Quote Link to post Share on other sites
JDoors Posted September 10, 2005 Report Share Posted September 10, 2005 To summarize (to see if I got this straight): You have USB devices that work as they should, you installed another, a hard drive, formatted and partioned it (how exactly, if you cannot see the drive in Explorer?), device manager sees it and shows no trouble, yet it does not even show up in My Computer or Explorer -- and it DOES work on another system? Ok, my brain hurts. I'm gonna hafta think on that one. Quote Link to post Share on other sites
dunce01 Posted September 12, 2005 Author Report Share Posted September 12, 2005 JDoors said: To summarize (to see if I got this straight): You have USB devices that work as they should, you installed another, a hard drive, formatted and partioned it (how exactly, if you cannot see the drive in Explorer?), device manager sees it and shows no trouble, yet it does not even show up in My Computer or Explorer -- and it DOES work on another system? Ok, my brain hurts. I'm gonna hafta think on that one. <{POST_SNAPBACK}>Thanks for the help.1. I have USB devices that work as they should.2. I did NOT install another hard drive.3. I installed "USB hard drive enclosure" with new formatted, and partioned (Fat 32) hard drive. 4. Unlike other USB devices, the "USB hard drive enclosure" is NOT seen in My computer, or Explorer, ONLY in device manager. (Compaq Armada e500, Windows 98se)5. In device manager both hardware, and driver is listed as working properly.6. On another machine with Windows Xp, the "USB hard drive enclosure" is seen everywhere, and works perfectly.Thanks... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.