DanTheCompaqMan Posted February 14, 2008 Report Share Posted February 14, 2008 Looking for a power cable for a Mac PCI card.It is a small female 4 pin molex attached to the standard 4 pin power molex connector.It is almost flat and slides on to a plastic tab on the PCI cards power connector. The top of the connector has a narrow plasticbar in between the 3rd and 4th pins from the front to back. Yamaha used this on their CD-RW drives.TIA,Daniel Quote Link to post Share on other sites
shanenin Posted February 14, 2008 Report Share Posted February 14, 2008 what you are describing sounds like the same connector used for a floppy disk Quote Link to post Share on other sites
isteve Posted February 14, 2008 Report Share Posted February 14, 2008 Probably be best to just go to your local computer hardware store with the card and match one up. I agree it looks like a IDE power lead. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.