Surfer_Gurl
-
Content Count
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Surfer_Gurl
-
-
Yeah, no more little yellow question mark! The device now says NVIDIA Network Bus Emulator
Now to get the AVerMedia A180 TV Tuner to work... the drivers are all up to date, but it's not being recognized my MCE or AVer's own software. Sigh... closer every day.
-
That website is a great tip! Unfortunately, there is no VEN DEV for this device. This is what the Hardware ID says:
PCI\VEN_10DE&DEV_0269&SUBSYS_10003842&REV_A3
PCI\VEN_10DE&DEV_0269&SUBSYS_10003842
PCI\VEN_10DE&DEV_0269&CC_068000
PCI\VEN_10DE&DEV_0269&CC_0680
NVIDIA MCP51 Ethernet controller.
Jcl, you've just reinforced that I AM the dumbest person here! "Why couldn't I find that?" I ask myself. Back to dig deeper. Thanks, jcl!
-
Are you sure you have the card in the proper slot for a single video card?
As for identifying the unknown device:
In Device Manager, right click on the device with the ? and select Properties, then click on the Details tab, then on Hardware ID in the drop-down box.You should see a hardware ID that looks like this: "PCI\VEN_4444&DEV_0016&SUBSYS_40090070&REV_01"
The 4 characters after the first _ are the Vendor ID and the 4 characters after the second _ are the Device ID. Go to this website http://www.pcidatabase.com/ and enter the Vendor ID and the Device ID and it will tell you what the device is. Then you can do an internet search for the drivers you need.
Yep, 8600 card is in the PCI Express slot closest to the CPU.
That website is a great tip! Unfortunately, there is no VEN DEV for this device. This is what the Hardware ID says:
PCI\VEN_10DE&DEV_0269&SUBSYS_10003842&REV_A3
PCI\VEN_10DE&DEV_0269&SUBSYS_10003842
PCI\VEN_10DE&DEV_0269&CC_068000
PCI\VEN_10DE&DEV_0269&CC_0680
I swear, this shouldn't be so hard... I think I'm the stupidest person on this forum!
Thanks again
-
The floppy definitely can be disabled in the bios. The option for the floppy is usually on the first page of the bios setup.
Yep, Shanenin, it was right in front of my face... don't know why I didn't see it before!
Still can't get the tv tuner to work, and their support hasn't been very helpful so far, may have to try to return it and get a different one.
Also, In my Device Manager, I have a yellow question mark, that I can't figure out.
Under 'Device by Type", it's between 'Network Adapters' and 'Ports'.
Under 'Device by Connection', it's just called 'Other PCI Bridge Device', and it's between 'NVIDIA nForce Serial ATA Controller' and 'PCI standard host CPU bridge'.
'Resources by Type' and 'by Connection' point to the same addresses:
In 'Resources by Type':
It's in Input/Output, between the addresses of:
[0000ef00-0000ef7f] NVIDIA GeForce 8600 GTS
[0000f200-0000f207] Other PCI Bridge Device
[0000f300-0000f30f] NVIDIA nForce Serial ATA Controller
IRQ (PCI) 10 Other PCI Bridge Device
- The AVerMedia TVHD MCE A180 is at IRQ 18
In Memory between the addresses of:
[efff4000-efff7fff] Microsoft UAA Bus Driver for High Definition Audio
[efffb000-efffbfff] Other PCI Bridge Device
[efffc000-efffcfff] NVIDIA nForce Serial ATA Controller
I don't know if it makes a difference, but my mobo is SLI ready, but the second slot, the one farther from the CPU, is empty
I know you old pros will know exactly what's wrong. I've checked every driver for all the cards, have Windows Auto Update on, and still am flummoxed!
Thanks again!
-
and by the way, sorry for my "not so good" English, I still have to improve it..
Friend, your English is better than a lot of Americans!
-
Not brave, just an idiot.
I was being polite!
-
You are braver than I am! Anything with a disclaimer, such as the blue paragraph on that page, would have scared me off, or at least made me buy a second router, before I risked making a doorstop out of my connection to the ether. Good luck. I think we will learn a lot from our Tech experts - Texperts? - here on this subject.
-
An update...
Things are running smoothly - and very fast! - except for a couple of things:
1. I still get a message when I'm booting, saying it can't find the floppy, press F1 to continue. I don't have it in the BIOS boot sequence, and have look everywhere (obviously NOT) in BIOS to fix this. Any ideas?
2. I can't get this thing to recognize my AverMedia A180 TV tuner. I install the drivers from the manufacturer, must reboot, and it's gone again. I downloaded their media software, and it says it might be weird with Media Center, so I just went in and configured Media Center (first time) and, no matterwhat I do, it won't recognize the tuner... any suggestions? For the gazillionth time... THANKS for your time and expertise.
-
Since you don't have a floppy, Are you still listing it in your first boot order. I seem to remember an enable/disable floppy seek setting
I have a Geforce 8800GTX and a Viewsonic and I use this cable with no problems
Also found out you can't use adapters with KVM switches
I thought there was a place in the BIOS settings or something... Thanks, I'll look in a few.
Finally, the cable I need, and at a good price! Thanks
-
Well, I can't find a DVI-I to DVI-D adapter, although one site suggested just breaking the analog pins off of my cable... but I dont think I want to do that. Guess I'll check out Circuit City next time I go into town (over 20 miles!) to look for an adapter, or just get a new cable.
Also, every time I turn on, I get a 'Floppy Not Found... hit F1" message. I didn't buy a floppy, because I don't think I need one, probably get one someday if I can find one that matches the other stuff in the bays. I know I can get it to go past this, just haven't figured it out yet...
All in all, this was surprisingly easy, posted after I realized that one of my RAM sticks had worked loose, and a SATA cable also was loose. THe post codes on my mobo made it trivial to fix.
And the audio header on my case is too short to hook up with cards on board... and the cool blue UV SATA cables I got from xoxide have ends too long to plug into the tight space between the side of the mobo and the case. Maybe I'll look for a right angle adapter if it exists, because I really want my lights to make this thing pop
Oh, yeah, I either forgot, or didn't realize that the Crucial RAM sticks have 8 lights on top that change... 1 and 3 the same and 2 and 4 the same... way cool ! I was thinking of putting a little hint of color into it, other than the blue/purple theme, and this RAM, along with the LEDs on the mobo really accentuate the look!
I'm sorry if it sounds like I'm bragging, but I'm not... I have no one here to talk to (my disabled husband doesn't know computers), and am going from a 6 year old business machine to this blazer... I'm just excited! Thanks, Friends!
-
Just put in the disk... duh
I'm looking at that cable site... if they don't have it, it probably doesn't exist...
I looked there and at other sites, and a DVI-I to DVI-D adapter doesn't exist, and I figured out why... DVI-I has analog and digital, but DVI-D is only digital. Therefore, I just need to get a DVI-D cable for my monitor. I should have done a bit more research before I bought this cable.
-
Just for convenience I'd reinstall on the C drive, programs usually look for it to install stuff to, it'll say invalid path or something and you'll have to manually fix the C to be an F in the install path.
Great idea... just I'm not sure how to do that.
-
I was too sleepy last night, and accidentally installed my OS on the F: drive (both drives are partitioned into two). Will this cause problems? I think I need to figure out how to reinstall it on c:
Suggestions? Thanks
One issue I found, is that my graphics card has DVI-I, and LG monitor has DVI-D cable... sigh... four little pins prevent me from using the good cable, so I'm using the old-style cable. Have to look for an adapter today
-
If you haven't built one in a while, pay close attention to the BIOS settings. I even had to enter if my CPU fan was a 3 or 4 pin with my Abit board
Will do, Garmanma... thanks for the heads up. THis system seems to do most all of the set up for me, so I need to go in and check everything ater I install the drivers, which I'm doing fight now.
I know you all are far away, but this is my first build, and talking to you all has helped boost my confidence... Back in a bit... with more questions, I bet.
-
Trying to post, I keep getting "Early PM Initialization", then "Base Memory Detect", with constant beeping at second code. Any suggestions?
Never mind... one stick of RAM had worked loose... will keep you updated...
-
Great site, Garmanma! Thanks
-
Let us know when it posts :-)
I work slowly, as I have a disabled husband and a crazy bird to deal with, but it's all together, except for the last hard drive, that arrives today.
Two problems, though:
1) The front audio header cable is too short to plug into my mobo when all my cards are in. I'm going to look at xoxide or somewhere for an extention.
BTW: evga is awsome: I noticed that a back-panel cable wasn't in the package, so I emailed them. Got a reply in minutes apologizing, and a replacement was UPS-ed that same day!
2) I think I need an RF Blaster to run the TV tuner? I know nothing about this, just to plug the satellite output into the TV tuner... then...?
I appreciate your help. I KNOW everything is correct, and seated properly, but I've heard that they don't always post on first try. This mobo Has a two digit alphanumeric output, that tells what post problems there are! KEWL!
-
OK... This is what I got. Keep in mind that my budget was supposed to be about $700, and I spent over three times that much.
Case: Deep blue Sunbeam Transformer, with lots of blue & uv lights & fans
PS: Hiper 650W SLI Ready
Mobo: EVGA nForce 750i SLI FTW
CPU: Intel Quad Core Q6600
RAM: 4G Crucial
Cooler: ASUS V-70
HD: 2 750G Seagate Baracudas
Optical: Sony DVD
Video: EVGA EGeForce 8600 GTS
Audio: SoundBlaster Audigy SE
TV: AVerMedia AVerTVHD MCE A180 HDTV Tuner Card
Networking: Linksys Wireless-G Broadband Router & Gigabyte PC card
Monitor: LG 20" and Monitors/TVs I already have.
Whew... I really blew through my budget! Starting the assembly today! Wish me luck!
This is my first... Hope it's as easy as I think it will be... with your help...
-
Stupid stuff, yes, but I wanted to customize it a little. I like it. It's unique.
There's nothing stupid about customizing your rig! I like the Honda emblem
-
I'd say Acer. Bought a 19" for myself bout 2 years ago and it still rocks. Acer makes a lot of lower cost No-Frills monitors that perform great.
Although I went with an LG, I think that when I can afford a second monitor, it will probably be an Acer. That's down the road, though... I spent way more than I had planned on this new build!
-
Wow... thanks for all the advise. I shopped around for all of those brands, but ended up getting a 20" LG for under $200. My Uncle has several LGs, from TVs to his monitor, and I like the clarity. I hope it's good. On 6/3, the rest of my parts arrive, and I build my new toy! My first build - wish me luck!
-
Thanks... I'm shopping all over the net right now.
-
Buying a monitor today, want the biggest I can afford, as I don't see very well.
Any advise or recommendations on brands?
thanks, all!
-
32 bit OEM it is! I just bought a wireless G router & card, so, after the OS, it's on to the hard drives, tv tuner and cpu cooler.
My New Computer Build: Update
in Windows 10, 8, 7, Vista, and XP
Posted
I first went to Microsoft, to make sure all was updated there, even though I have automatic updates turned on; I installed SP3
Then went to NVIDIA, updated mobo drivers. then to EVGA for graphics drivers. I should have checked my device drivers between the above steps, but I waited till all was done, then looked, so I'm not sure which fixed it.
Still working on my TV Tuner... I have a couple more days left to return it if I can't get it to work
Anyone know how to use a tuner card with DishTV?