martymas Posted December 25, 2004 Report Share Posted December 25, 2004 hi team im every where but on line .for the last 3-4 days ive tried to configure mymodem.which is a intell 1154 536ep modem.and i cant find an option to configure it to dial up.this mandrake 10 found all the drivers but the modem. one unlike man9.1 where i had to go into the console and configure them through the command prompt and the modem cd.it found the sound card driver so there is a little improvement in man 10.tho overall im happy with the OS .tho i have to do alot of searching ive already installed applis i need and removed some i dont need. so surely ive made some progress .so now i need to leartn how to to configure this modem for dial up.cant wait to be able to get on this board with MANDRAKE 10 can any one help marty Quote Link to post Share on other sites
flashh4 Posted December 25, 2004 Report Share Posted December 25, 2004 hey marty, while surfing i found this dont know if it might help.......mandrake 10 .................STAY SAFE Quote Link to post Share on other sites
iccaros Posted December 27, 2004 Report Share Posted December 27, 2004 http://downloadfinder.intel.com/scripts-df...ms&submit=Go%21in case you don;t have the driver. as for maknig it dial you can use the command line echo "atd7777777" > /dev/modem (if simlinked) should work. (I think its been a while)or you can get minicom or kppp (should be under internet)I ma not sure at what stage you are having problems. so I included some articals .. I would like to see this work for you. so if you could ..Did you install a driver?if so does it show up linked when you do a lsmod? if so the dialing up is covered in some of the following ...if not let us knwo so we can help with installing the driver. more informationhttp://www.yolinux.com/TUTORIALS/LinuxTutorialAOL.html (for AOL)http://howtos.linux.com/howtos/Modem-HOWTO-12.shtmlhttps://secure.linuxports.com/howto/ppp/http://www.start-linux.com/topics/topic_54.phphttp://www.bu.edu/pcsc/modem/configure/linuxppp-howto.html Quote Link to post Share on other sites
hitest Posted December 27, 2004 Report Share Posted December 27, 2004 Thanks for helping iccaros. Quote Link to post Share on other sites
martymas Posted December 27, 2004 Author Report Share Posted December 27, 2004 hi team sorry i havent online for 2-3 days.and havent been able to get back .i havent searched .the links yet .ive inserted the modem driver cd .but frome im not sure what to do .in mandrake 9.1 i had to extract the driver from the the konsole. but in to mandrake 10 .i cant get it to flow on using the tab key. the command line i used was root : tar pvxzf /mnt/cdrom/driver/linux/Intel-536ep-M.tgzbut once i get to cdrom it wont tab.so what am i doing wrong or in man10does the commaND line not apply.sorry to be so diffucult but at this stage im completly lost .tho i know how to add and remove programs .right now im off to investigate the links iccaros.posted so thanks for helping. marty Quote Link to post Share on other sites
TheLetterK Posted December 27, 2004 Report Share Posted December 27, 2004 hi team sorry i havent online for 2-3 days.and havent been able to get back .i havent searched .the links yet .ive inserted the modem driver cd .but frome im not sure what to do .in mandrake 9.1 i had to extract the driver from the the konsole. but in to mandrake 10 .i cant get it to flow on using the tab key. the command line i used was root : tar pvxzf /mnt/cdrom/driver/linux/Intel-536ep-M.tgzbut once i get to cdrom it wont tab.so what am i doing wrong or in man10does the commaND line not apply.sorry to be so diffucult but at this stage im completly lost .tho i know how to add and remove programs .right now im off to investigate the links iccaros.posted so thanks for helping. marty mkdir ~/archivecp /mnt/cdrom/driver/linux/Intel-536ep-M.tgz ~/archivetar -xzvf ~/archive/Intel-* Quote Link to post Share on other sites
iccaros Posted December 27, 2004 Report Share Posted December 27, 2004 hi team sorry i havent online for 2-3 days.and havent been able to get back .i havent searched .the links yet .ive inserted the modem driver cd .but frome im not sure what to do .in mandrake 9.1 i had to extract the driver from the the konsole. but in to mandrake 10 .i cant get it to flow on using the tab key. the command line i used was root : tar pvxzf /mnt/cdrom/driver/linux/Intel-536ep-M.tgzbut once i get to cdrom it wont tab.so what am i doing wrong or in man10does the commaND line not apply.sorry to be so diffucult but at this stage im completly lost .tho i know how to add and remove programs .right now im off to investigate the links iccaros.posted so thanks for helping. marty the very first link (the one to the drive has a read me file and the newest driver for mandrake 10. do not use the one from your cd it may not work with mandrake 10 as it uses a 2.6 kernel and the cd is for the 2.4 kernelthe read me looks strait forwared enough. untill you get to permissions. let us knwo ehn you get to that point and well help you.. here it is again in case you are wonderinghttp://downloadfinder.intel.com/scripts-df...ms&submit=Go%21download this filehttp://downloadfinder.intel.com/scripts-df...Y&ProductID=977use this read meftp://aiedownload.intel.com/df-support/6498/ENG/readme.txthere is the read meReadMe file for theIntel® 536ep V9x DF modem Linux drivercontents:1. License2. Release Notes3. Installation/Uninstallation4. File Descriptions5. International Users6. Beta Tester appreciation7. Security issues8. Compilation issues a. Instructions for Debian Users b. Kernel Source9. What is the Hamregistry?10. what's v92 and v44?11. The Hamregistry tool (for persistance)12. Known Bugs/Issues13. Comments, ideas, problems, fixes-------------------------------------------------------------------------------1. LICENSEIMPORTANT - read the file "LICENSE.txt" for the INTEL SOFTWARE LICENSE AGREEMENT BEFORE COPYING, INSTALLING OR USING.-------------------------------------------------------------------------------2. Release Notes This release is not compatible with kernels prior to 2.4. This release supports 2.4.x and 2.6.x kernels. It is not compatible to 2.2.x kernels. The softmodem binary was compiled with gcc version 3.2 v92 support added: modem on hold AT command set, PCM upstream, v44, and quick connect are implemented. Linux Compatability tests are performed on the latest or previous versions of the following distributions: Mandrake, RedHat, and SuSE-------------------------------------------------------------------------------3. INSTALLATIONPrerequisites: 1. root access 2. bash shell to run install scripts 3. an Intel536ep modem 4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING. (found on your distribution's CD)6 steps to install 1. login as ROOT 2. extract the archive into a directory with "tar -zxvf <archivename>.tgz" 3. cd into the directory it created. 4. Type: make clean 5. Type: make 536 6. Type: make installThis will create a /dev/modem device file. This file is used as an interface to modem by all applications: minicom, kpppd, efax, etc. Please configure the applicationsto use /dev/modem if neccessary.The installation script has been designed for the following distributions release versions Mandrake-release SuSE-release Redhat-release Fedora Core 2 -release Unknown distributions install modules and utilities but will not install boot scripts!.Please examine the 536ep-inst and 536ep-boot scripts if you have a different distribution.The driver registers itself as character device major number 240, minor number 1.ATTENTION: if the driver compiles but the script just wont work for you. Here are the bare minimum steps to get your modem to work. 0. log in as root. 1. insmod -f Intel536.o (Intel536.ko for kernel 2.6) 2. you can start "hamregistry &" at this point if you wish. 3. rm /dev/536ep 4. mknod /dev/536ep c 240 1 (note "240" is the default, if it does not work see what /proc/devices says 536ep's major number is) 5. ln -s /dev/536ep /dev/modem 6. start a comm application like minicom and use the modem. 7. see section 3 (International Users) for info on setting the correct country settings.Uninstallation.Linux modem driver is started by the boot script 536-boot. The script location is distribution specific, usually /etc/init.d. So to uninstall the modem, deletethis file, and stop the modules using command: rmmod Intel537make uninstall does this for redhat.-------------------------------------------------------------------------------4. FILE DESCRIPTIONS536-inst installation script to install 536 modules and supporting filesfiles copied to /lib/modules/(kernel-version)/misc Intel536.o (Intel536.ko) modem driverfiles copied to /etc/rc.d/... (path differes per distribution) 536-boot boot scrip to start and stop driver modulefiles copied to /usr/sbin hamregistry hamregistry is the "registry" like tool that the modem uses to get and store persistant data such as county info and profile strings.files copied to /etc hamregistry.bin file that stores the initial persistant data for modem.-------------------------------------------------------------------------------5. INTERNATIONAL USERShamregistry will store the last country setting youset in the modem.in minicom (or equivalent comm application)the commmand to change country setting is "AT+GCI="the command takes a t.35 country code in hexadecimal.below is a list of currently supported t.35 country codes.you can also put this "AT" command in the init string ofthe comm application you are using.if you are a CTR-21 country I think you should be able to choose a CTR-21 country on the list and be ok. but that's no guarantee.The same goes for countries that are "USA" compatable.(this table also exist in the source file wwh_dflt.c thatships with the Intel536ep driver)country code t.35 code---------------------------USA 1 B5 KOR 82 61 ECU 593 35 BOL 591 14 CHL 56 15 COL 57 27 PAN 507 85 PER 51 88 SAU 966 98 THA 66 A9 VNM 84 BC SWE 46 A5 DNK 45 31 FIN 358 3C NOR 47 82 ISL 354 52 IRL 353 57 ISR 972 58 LIE 423 68 ESP 34 A0TUR 90 AEDEU 49 42AUT 43 0ACHE 41 A6CYP 357 2DGRC 30 46ITA 39 59LUX 352 69NLD 31 7B GBR 44 B4 BEL 32 0FFRA 33 3DPRT 351 8BPAK 92 84JPN 81 00RUS 7 B8AUS 61 09MYS 60 6CCHN 86 26HKG 852 50SGP 65 9CNZL 64 7EARG 54 07BRA 55 16MEX 52 73TWN 886 E3IND 91 53PHL 63 89IDN 62 54BHS 103 0B BRB 104 0E BMU 105 12 GTM 502 49 HTI 509 4E HND 504 4F JAM 1 5B NIC 505 7F PRY 595 87 PRI 121 8C SUR 597 A3 TTO 117 AC URY 598 B7 VEN 58 BB ZWE 263 C4GUY 592 4DEST 372 E0HUN 36 51SVN 386 E2ARE 971 B3 SVK 421 2ECAN 107 14 CRI 506 1B DOM 110 33 SLV 503 37 GMB 220 41 GIB 350 45 POL 48 8AEGY 20 36CZE 420 2EZAF 27 9FGUF 594 E1-------------------------------------------------------------------------------6. Thanks to the following beta testers for their valuable input and suggestions during the HaM 333 beta test between January 2 - 26, 2001 and those who submitted bug reports for Intel 536 driverDorian S. AranedaSean WalbranRob ClarkMarvin StodolskyDominique DuvalRoman Krais Ulrich GuentherMarcelino Viana PinheiroThomas S. IversenJospeh TeichmanMichel Bartolone (MED)Ramon Gonzalez MontoiroRyoji KawagishiTorsten Vogel"jandro"Ian Carr-de AvelonHelga WeindlEd CasasBernhard HoelckerAlexander "Sasha" VoytovAlbert WooAndrey VitsenkoPeter HirschmannTom Laneand all of the helpful Linux HaM and 536 modem usersaround the world and at www.linmodems.org -------------------------------------------------------------------------------7. Security issuesthe 536-inst and 536-boot file install the files and device nodes as root for the owner and group. this will cause problems for those who want to user the modem to dialoutusing an account other than root.In SuSE, "dialout" is the group used to install the files and device node.This way, anyone belonging to the "dialout" group can use the modem to dialout.(take a look at /etc/group)I did not want the script to allow full access of the modem to everyone without"root" knowing.Edit the 536-boot and 536-inst scripts to fit your needs.-------------------------------------------------------------------------------8. Compile issues a. this driver will now compile with the this path: /lib/modules/<kernel version>/build/include the 2.4.4+ kernels says to copy the /boot/vmlinuz.version.h over to the kernel build path. I have the makefile do this if this file exists. You must install the kernel source code anyways. It should be on your distribution's CD.-------------------------------------------------------------------------------9. What is the Hamregistry? The hamregistery is an application that stores data for the 536ep driver onto the disk. hamregistry stores information from the driver that needs to persist from reboot to reboot such as you current country setting. The 536ep-inst install script and the 536-boot script start this utility automatically for you. If this tool is not present when the driver gets used your profile, quickconnect, and current country setting will not be saved but the driver should still work fine. The only step that would need to be done is to make sure that the driver is set to the correct country with at+gci= (see section 5)-------------------------------------------------------------------------------10. What's v92 and v44? a. modem on hold: (ISP and your ISP dialer must also support this) This will allow you to pause your ppp connection to answer an incoming call. You will need call waiting, dialer, and ISP support for this to work. When you are done with the call you can resume your ppp connection without having to reconnect. The AT command set for this feature exist in the driver. b, pcm upstream: (ISP must also support this, as of version 4.32 I dont know any ISP's that do) This will allow faster upload speeds. to enable: at+pig=0 to disable: at+pig=1 c. quickconnect: Once you make a call to a v92 modem, your phoneline characteristics are stored. Whenever you make a new v92 connection it will use this data to make the call negotiation quicker (approx 10 seconds). to enable: at+pqc=0 at+pss=0 to disable: at+pss=2 d. v44: (ISP must also support this) A better compression protocol than v42 which can give you better transfer speeds.-------------------------------------------------------------------------------11. The Hamregistry tool The hamregistry tool is used to provide persistance of settings across reboots. The haminst and hamboot scripts automatically setup and start the hamregistry background task for the modem to use. The hamregistry tool has command line arguments for those who wish to customize persistant settings. To use these command lines you must first stop the driver with "bash hamboot stop". Once the driver has been stopped you may run hamregistry with one of these arguments to store into the /etc/hamregistry.bin persistance file: (supply value for items in < >) -mfg <Modem manufactures name> -mod <Modem model name> -hookflash <0,1,2> hookflash method: 0=(default)without tone 1=with tone 2=reserved -v92rptopt <0,1> control v92 reporting: 0=PCM upsteam only 1=(default) all v92 -gpio_lpohd <0,1> Handset Hook detection: 0=not supported 1=(default)supported -current_country <t.35 code> This info is written to the /etc/hamregistry.bin file. If hamregistry.bin exists along with the installation files, haminst will copy it to /etc/hamregistry.bin when installing the modem.-------------------------------------------------------------------------------12. Known Bugs/Issues a. Be aware that the build replaces your /lib/module/<kernver>//build/include/linux/version.h file with /boot/vmlinuz.version.h (this is what Linus T. told me to do with a compiler error) b. There may be an incompatibility with DevFS. The 536ep device may be located in /dev/tts/536ep instead of /dev/536ep. Be aware of this and link /dev/modem to the 536ep device that corresponds to your setup. c. Currently there is a problem with driver and SuSE 7.2 ppp connections. I have been able to get ppp connection with bellsouth by calling this bash script and wvdial config section: ------my script---------------------- #! /bin/sh /usr/sbin/pppd -detach lock asyncmap 00000000 \ defaultroute debug /dev/modem 115200 \ ipparam ppp0 linkname ppp0 \ noauth \ connect "/usr/bin/wvdial --chat bellsouth" ------my /etc/wvdial.conf section --- [Dialer bellsouth] Modem = /dev/modem Baud = 115200 Init1 = ATZ Inti2 = ATQ0 V1 E1 S0=0 &C1 &D2 Dial Command = ATDT Phone = 9777888 Username = myloginname Password = mysecretpassword #Ask Password = 1 Stupid Mode = 0 ------------------wvdial.conf can be created automatically: wvdialconf wvtest.txtFound a modem on /dev/537, using link /dev/modem in config.Modem configuration written to wvtest.txt.--------Edit wvtest.txt as indicated. If your country is not the Unites States,the Init lines should be Init1 = ATZ Init2 = AT+GCI=< your hexadecimnmal country code > Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Then: cp wvtest.txt /etc/wvdial.conf, which will later direct the dialout.First check COMM status with: # ifconfigeth0 Link encap:Ethernet HWaddr 00:D0:59:36:60:A2 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 Interrupt:11 Base address:0x2000lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:212 errors:0 dropped:0 overruns:0 frame:0 TX packets:212 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)The loopback "lo" is standard. But any extra COMM mode such as eth0should be shut down if it will interfere with domain name services (DNS) ifconfig eth0 downwill suffice more most systems. Check with: ifconfiglo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:212 errors:0 dropped:0 overruns:0 frame:0 TX packets:212 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)Then dialout with wvdial &# wvdial--> WvDial: Internet dialer version 1.54--> Initializing modem.--> Sending: ATZATZOK--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0OK--> Modem initialized.--> Sending: ATDT9777888--> Waiting for carrier.ATDT9777888CONNECT 53333 V44--> Carrier detected. Waiting for prompt.** dialup12.rol.ru Terminal Server **Login: --> Looks like a login prompt.--> Sending: internetinternetPassword: --> Looks like a password prompt.--> Sending: (password) Entering PPP Session. IP address is 66.44.1.90 MTU is 1006.--> Looks like a welcome message.--> Starting pppd at Sun Apr 4 23:11:49 2004--> pid of pppd: 4879--> Using interface ppp0 ROM checksum self-test: passed (0xdbd8681d). CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 pppd 2.4.2 started by root, uid 0 Using interface ppp0 Connect: ppp0 <--> /dev/ttyLT0 kernel does not support PPP filtering--> local IP address 68.14.26.80--> remote IP address 207.116.5.132--> primary DNS address 207.116.4.8--> secondary DNS address 207.116.4.9 PPP BSD Compression module registered PPP Deflate Compression module registered local IP address 68.14.26.80 remote IP address 207.116.5.132 primary DNS address 207.116.4.8 The DNS address gets copied to /etc/resolv.confwherefrom it consulted to find NAME SERVERS which translate Named addresses intothe Numerical addresses used by the Internet system. Display with cat /etc/resolv.confsearchnameserver 207.116.4.8nameserver 207.116.4.9Test navigation capability with a known Internet address.For example the numeric address of novell.com is 130.57.4.70# ping 130.57.4.70PING 130.57.4.70 (130.57.4.70): 56 data bytes64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=208.0 ms64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=209.9 ms64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 msshows that your System is attached to the internet, while using the named address ping novell.comPING novell.com (130.57.4.70): 56 data bytes64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=204.4 ms64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=210.0 ms64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 ms64 bytes from 130.57.4.70: icmp_seq=3 ttl=50 time=210.0 msshows that DNS services are OK. ALWAYS quickly abort a "ping" test with Ctrl -CThis COMM session was started with wvdial &where the "&" puts wvdial in the background and allows command prompt recoveryTo stop this session I will fore ground (fg) fg wvdial and then stop wvdial with Ctrl-C-------------------------------------------------------------------------------13. Comments, ideas, problems, fixes? please contact:Linux Voice Band Modems (VBM) of Intel Residential Access Division (RAD)[email protected]http://developer.intel.com/design/modems/To restrict email volume, please email only development related issues that areneeded to fix a bug or improve the driver. General questions on how to use the Linux OS may not be responed to.Other resources and information on Linux controllerless modems can be found on these useful siteshttp://www.linmodems.org andhttp://linmodems.technion.ac.ilIf you have problems please read Jacques' PostInstall.html FIRST at http://linmodems.technion.ac.il/before sending a message to [email protected] Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.